Daytona 126500 Panda Comprehensive(Gen,Clean,VSF,APS,QF)--part I

Hello, everyone

This is steve,we will present the detailed comparison of 126500 Panda Daytona between the Clean, VS, APS and the Gen this time.

Front View

Photos Under Lighting

Under the same indoor white lighting, the dials from Clean, VS, and QF have a slightly cool white tone, while APS leans toward a pure white. To the naked eye, the dial color of APS is the closest to the Gen.

https://preview.redd.it/ndfoeu6v1pxd1.jpg?width=10000&format=pjpg&auto=webp&s=6d07ef717d4fa8a8f0093c6bd15f7eede5d1d2fc

Bezel and Crystal

The crystal heights from all four factories match the Gen. Clean has updated the crystal on the 1265xx Daytona and there is no obvious improvement after swapping to the Deep crystal.

The chamfer of the crystal edge of Clean is more rounded , which is slightly different from the Gen.

https://preview.redd.it/3foy88n22pxd1.jpg?width=10000&format=pjpg&auto=webp&s=1f69b146d8da78cc7a92f7807bd5823e4b46ea79

Bezel Engraving

Since the Gen has been in use for a while, the markers have slight yellowing and smudges.

The ceramic bezels from Clean, VS, and QF appear to come from the same accessories factory,with similar numeral font and engraving depth.

However, the bezel from the APS is the most closest to the Gen, with more accurate numeral markers thickness and depth.

The index scale below the numeral is also slimmer, and the triangular scale is sharper, which is clearly different from the other three factories.

Dial Crown and Markers

The dials of Clean and VS come from the same accessories factory,which is the closest to the Gen. the dial markers from the QF is similar to the Clean and VS but with minor differences.

APS is no polished triangular scale for the stick markers, appears to more tough.

(dial markers from the QF is also good, but it seems to be from the other provider, you could make a comparison and choose one you prefer)

Hands and Lume Fill

All four factories have lume fills with a slight pale green tint. Initially, I assumed this was just a characteristic of the lume, but after comparing all five watches under the same lighting,the Gen markers color remained unchanged and consistent with the dial color.

The watches from the other four factories showed the light green effect shown in the picture.

https://preview.redd.it/9fdt152e2pxd1.jpg?width=10000&format=pjpg&auto=webp&s=86f1b7eadb2be4cd3fe5a2f5d825ebe8a2ede81e

Dial Printing

Clean and VS dials have slightly wider spacing between the three letters "TER" in "CHRONOMETER" below the crown than the Gen.

The APS has the correct spacing, but the overall font on the dial is thinner than the original. The red text "Daytona" under the hands is also lighter than the Gen.

The QF font printing looks like a bolder version of the APS.

https://preview.redd.it/276petgk2pxd1.jpg?width=10000&format=pjpg&auto=webp&s=5ee6bdbf0b66ce33a632a0aac524fe833d241b5b

https://preview.redd.it/0t0g0ivk2pxd1.jpg?width=10000&format=pjpg&auto=webp&s=6d1498242bad0a1b8a7cdd6524ccfb91a1b6eb30

Subdials

Gen has 9-10 black rings, while the APS and QF have the same quantity.

Clean and VS have only 7-8 black rings.

The sub-dial numbers printed in color and ink thickness on the APS and QF are closer to the Gen,but if you look closely, the continuity of the ink printing on the sub-dial is not as complete as the GEN.