Active Matrix Headlights using FORScan

I followed the instructions from the F-150Lightning forum:

Glare-free (matrix) headlights (localized dimming of brights based on surrounding traffic): Successful Lariat ER with 5/5/22 build date. The necessary hardware is available in my Lariat ER trim. The swiveling (dynamic bending) lights continue to work with these settings. Settings were adapted from this F150gen14 ICE forum thread. Also thanks to @FlasherZ and

APIM 7D0-09-01 x1xx xxxx xx-- APIM 7D0-09-03 xxCx xxxx xx-- IPMA 706-01-01 xxxx xxx9 xx-- SCCM 724-04-01. xxx4 xxxx xx-- HCM 734-01-02 Bxxxx x2xx xx- HCM 734-03-02 xxxx xxx1 x1-- HCM 734-11-01 0735 89
IPC 720-01-01 xx8x xxxx xx-- IPC 720-10-01 xxxx xxx3 xx--

I am having issues with my ‘24 Lariat in accessing the IPMA (as built) module in FORScan. Anyone else having this issue? Can’t seem to get it working without that access. I was able to change my mirrors to only fold out when I start the car because I go in and out of my truck a lot and don’t want to burn the motors out. I also increased the momentary blinker rate from 3 blinks to 6. Those worked. Any advice or suggestions? Thank you.

Edit: the table didn’t format correctly, here is the link: https://www.f150lightningforum.com/forum/threads/f150-lightning-forscan-thread.11406/